Technical Help

This page contains help on some of the more common questions regarding SI_SCOPE and SI_COMM.

SI_SCOPE and SI_SCOPE Pro

• SI_SCOPE/SI_SCOPE Pro "Line Status Errors "
• SI_SCOPE Pro "Unable to Virtualize Irq" (SI_SCOPE ver 3.X only)
• SI_SCOPE Pro "Cannot Find Communications Driver"
• SI_SCOPE Pro "Cannot see PCMCIA Port"
• SI_SCOPE Pro "Debugging Multiple RS232 Channels From the Same PC"
• SI_SCOPE Pro "Bypassing the Cable Check for 3 Wire or TTL Links"
• SI_SCOPE Pro "Using USB <-> RS232 Converters"
• SI_SCOPE Pro "QUATECH DSP-100 Setup"
• SI_SCOPE Pro "ScopeCfg may stop responding"

SI_SCOPE Ultra-Tap

• Installing the Ultra-Tap Cable with SI-SCOPE
• Debugging multiple RS232 channels from one PC with multiple Ultra-Tap Cables

SI_COMM

• SI_COMM "Opening multiple RS232 ports"

Send mail to webmaster@sinnovations.com with questions or comments about this web site.
Copyright © 1999-2007 Software Innovations Inc.

This page last updated on 07/07/2011